# Wiring a Honeywell HART based Pressure or Flow Transmitter installation versus wring a Honeywell Digitally Enhanced (DE) based Pressure or Flow Transmitter installation

**URL:** <https://forumautomation.com/t/wiring-a-honeywell-hart-based-pressure-or-flow-transmitter-installation-versus-wring-a-honeywell-digitally-enhanced-de-based-pressure-or-flow-transmitter-installation/361>\
**Category:** Field Instrumentation\
**Created:** [March 25, 2015, 6:07pm UTC](https://forumautomation.com/t/wiring-a-honeywell-hart-based-pressure-or-flow-transmitter-installation-versus-wring-a-honeywell-digitally-enhanced-de-based-pressure-or-flow-transmitter-installation/361 "2015-03-25T18:07:57Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [March 25, 2015, 6:07pm UTC](https://forumautomation.com/t/wiring-a-honeywell-hart-based-pressure-or-flow-transmitter-installation-versus-wring-a-honeywell-digitally-enhanced-de-based-pressure-or-flow-transmitter-installation/361/1 "2015-03-25T18:07:57Z")

</div>

there is a fundamental difference between wiring a Honeywell HART based Pressure or Flow Transmitter installation versus wring a Honeywell Digitally Enhanced (DE) based Pressure or Flow Transmitter installation

The HART communication signal is comprised of a AC sine wave signal with an amplitude of +/- 0.5 mA and with a frequency of 1100 and 2200 Hz. As a result, wire capacitance is of primary concern in a HART based transmitter installation. Therefore in a HART based transmitter installation cable lengths with differing cable core sizes, and cable capacitance are important.

The DE signal is considered a DC square wave signal with amplitude of 20mA and as a result wiring impedance is of primary concern. Too much wring impedance, which is directly related to wiring length and gauge will reduce the voltage available to the transmitter. Therefore in a (DE) transmitter installation larger gauge wire is recommended to reduce loop impedance
