# Why we use 250ohm resistor in HART protocol and why don’t we use it in fieldbus?

**URL:** <https://forumautomation.com/t/why-we-use-250ohm-resistor-in-hart-protocol-and-why-don-t-we-use-it-in-fieldbus/8982>\
**Category:** Field Instrumentation\
**Created:** [December 19, 2020, 6:38am UTC](https://forumautomation.com/t/why-we-use-250ohm-resistor-in-hart-protocol-and-why-don-t-we-use-it-in-fieldbus/8982 "2020-12-19T06:38:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [December 19, 2020, 6:38am UTC](https://forumautomation.com/t/why-we-use-250ohm-resistor-in-hart-protocol-and-why-don-t-we-use-it-in-fieldbus/8982/1 "2020-12-19T06:38:17Z")

</div>

what is the purpose of 250ohm resistance in hart

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [December 19, 2020, 6:39am UTC](https://forumautomation.com/t/why-we-use-250ohm-resistor-in-hart-protocol-and-why-don-t-we-use-it-in-fieldbus/8982/2 "2020-12-19T06:39:20Z")

</div>

HART works on (0-5v) DC WKT V=IR (20mA\*250= 5 V) and another reason is HART baud rate(19600) is high compare to transmitters(9800), so in order to communicate baud rate mismatch will happen that’s why we reduce the baud rate of HART by adding resistor(250ohms)
