# Why we open low side in atmosphere of open tank transmitter tapping

**URL:** <https://forumautomation.com/t/why-we-open-low-side-in-atmosphere-of-open-tank-transmitter-tapping/9099>\
**Category:** Field Instrumentation\
**Created:** [January 25, 2021, 7:23am UTC](https://forumautomation.com/t/why-we-open-low-side-in-atmosphere-of-open-tank-transmitter-tapping/9099 "2021-01-25T07:23:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [January 25, 2021, 7:23am UTC](https://forumautomation.com/t/why-we-open-low-side-in-atmosphere-of-open-tank-transmitter-tapping/9099/1 "2021-01-25T07:23:00Z")

</div>

What is the reason to open the low side of tank transmitter tapping to the atmosphere

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [January 25, 2021, 7:26am UTC](https://forumautomation.com/t/why-we-open-low-side-in-atmosphere-of-open-tank-transmitter-tapping/9099/2 "2021-01-25T07:26:05Z")

</div>

Because the pressure on the surface of the open tank is just atmosphere pressure, so we leave the low side in the atmosphere.

To eliminate the atmospheric pressure

---

<div class="post-metadata">

**Author:** ![carl\_e](https://forumautomation.com/letter_avatar_proxy/v4/letter/c/94ad74/32.png) [@carl\_e](https://forumautomation.com/u/carl_e)\
**Post date:** [January 28, 2021, 9:08pm UTC](https://forumautomation.com/t/why-we-open-low-side-in-atmosphere-of-open-tank-transmitter-tapping/9099/3 "2021-01-28T21:08:19Z")

</div>

One caution with respect to “tanks open to the atmosphere”.

Some applications use vents to contain highly volatile liquid vapors. The vents allow a build-up of pressure to a couple inches of water column, then release the pressure and let it build until the pressure reaches setpoint again.

This type of situation requires a piped connection from the vapor space to the transmitter, because the vapor pressure build-up will appear a level change if not compensated with a low connection to the DP transmitter.
