# Why set 0% percent scale to 4mA and not 0mA?

**URL:** <https://forumautomation.com/t/why-set-0-percent-scale-to-4ma-and-not-0ma/13004>\
**Category:** Field Instrumentation\
**Tags:** instrumentation\
**Created:** [February 10, 2025, 2:31pm UTC](https://forumautomation.com/t/why-set-0-percent-scale-to-4ma-and-not-0ma/13004 "2025-02-10T14:31:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [February 10, 2025, 2:31pm UTC](https://forumautomation.com/t/why-set-0-percent-scale-to-4ma-and-not-0ma/13004/1 "2025-02-10T14:31:04Z")

</div>

As we already know, a current value of 4mA represents 0% of the scale, a current value of 20mA represents 100% of the scale and any current value between 4 and 20mA represents a corresponding percentage between 0% and 100%.

 ![IMG_20250210_195639](https://cdn.forumautomation.com/original/2X/d/d9eb124e233322ccae23a61ffd794f0adea28d52.jpeg)

This is because it is easier for us to detect if there is an open circuit (broken wire/fault) on the instrument itself.

We use 4mA as a “live zero”. That means if we measure the current at OmA, the instrument is probably faulty or our circuit is in an open loop.
