# Why Neutral Cable Size is Half of Phase Cable?

**URL:** <https://forumautomation.com/t/why-neutral-cable-size-is-half-of-phase-cable/13367>\
**Category:** Electrical\
**Tags:** interviewquestions\
**Created:** [July 8, 2025, 4:44pm UTC](https://forumautomation.com/t/why-neutral-cable-size-is-half-of-phase-cable/13367 "2025-07-08T16:44:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [July 8, 2025, 4:44pm UTC](https://forumautomation.com/t/why-neutral-cable-size-is-half-of-phase-cable/13367/1 "2025-07-08T16:44:26Z")

</div>

**Why Neutral Cable Size is Half of Phase Cable?**

 ![image](https://cdn.forumautomation.com/original/2X/5/5865ccfed2b3f6fb7e51ef223bdff669fbaacd10.jpeg)

---

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [July 9, 2025, 12:31pm UTC](https://forumautomation.com/t/why-neutral-cable-size-is-half-of-phase-cable/13367/2 "2025-07-09T12:31:59Z")

</div>

• In [**electrical systems**](https://forumelectrical.com/functional-testing-for-electrical-systems/) electrical systems, especially in balanced 3-phase networks, the neutral wire is frequently constructed with a smaller cross-sectional area than the phase cables.

• This is primarily due to the fact that in a perfectly balanced 3-phase system, the currents in the 3 phase conductors are equal in magnitude but 120 degrees out of phase with one another.

• When these currents are vectorially added, the net current in the neutral conductor is potentially zero.

• As a result, the neutral conductor carries just the unbalanced (or) residual current, which is much lower than the phase current.

• As a result, installing a full-size neutral conductor is typically unneeded, increasing the cost and weight of the cable installation.

• To maximize material consumption and save costs, cables like 3.5-core cables are often used, with full-sized three phase conductors and a neutral conductor that is half or 70% the size.

• However, this method is only suitable in systems with balanced loads & low harmonic distortion. In situations where single-phase loads are dominant or harmonic currents exist—as is common in residential (or) commercial installations—the neutral can carry currents equal to or larger than the phase current.

• In such a case, a full-size neutral is required to maintain safety and prevent overheating.

• Finally, the decision to minimize the neutral size should be based on accurate load analysis and adherence to electrical standards & safety requirements.

> ### You can also follow us on [**AutomationForum.co**](https://automationforum.co/), [**Facebook**](https://www.facebook.com/instrumentation.control) and [**Linkedin**](https://www.linkedin.com/showcase/81532759/feed/posts/) to receive daily Instrumentation updates.

> ### You can also follow us on [**ForumElectrical.com**](https://forumelectrical.com/), [**Facebook**](https://www.facebook.com/profile.php?id=100091841583670) and [**Linkedin**](https://www.linkedin.com/showcase/91130242/feed/posts/) to receive daily Electrical updates.
