# Why is vibration measurement very important on gas turbine and compressor

**URL:** <https://forumautomation.com/t/why-is-vibration-measurement-very-important-on-gas-turbine-and-compressor/126>\
**Category:** Field Instrumentation\
**Created:** [October 3, 2014, 2:44pm UTC](https://forumautomation.com/t/why-is-vibration-measurement-very-important-on-gas-turbine-and-compressor/126 "2014-10-03T14:44:05Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [October 3, 2014, 2:44pm UTC](https://forumautomation.com/t/why-is-vibration-measurement-very-important-on-gas-turbine-and-compressor/126/1 "2014-10-03T14:44:06Z")

</div>

Gas turbines and compressors are high speed rotating equipment. On equipment when vibration exceeds the manufacturer limits can cause sever damage to both itself and to its associated components/parts. Hence it is important to measure and monitor vibration on the running equipment. Generally a high vibration pre-alarm and shutdown limits are set as per the manufactures recommendations.
