# Why glycerine is used in pressure gauge?

**URL:** <https://forumautomation.com/t/why-glycerine-is-used-in-pressure-gauge/8765>\
**Category:** Field Instrumentation\
**Created:** [October 31, 2020, 3:15pm UTC](https://forumautomation.com/t/why-glycerine-is-used-in-pressure-gauge/8765 "2020-10-31T15:15:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [October 31, 2020, 3:15pm UTC](https://forumautomation.com/t/why-glycerine-is-used-in-pressure-gauge/8765/1 "2020-10-31T15:15:23Z")

</div>

**We have pressure gauge and temperature gauge, the pressure gauge has glycerine and the temperature gauge doesn’t have it and why is that?**

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [October 31, 2020, 3:17pm UTC](https://forumautomation.com/t/why-glycerine-is-used-in-pressure-gauge/8765/2 "2020-10-31T15:17:53Z")

</div>

In most cases, glycerine filled pressure gauge is installed in a place where the chances of vibrations are high.

It’s just damping the motion of needle indicator and acting as small opposing torque to gear connected with the primary sensing element… in order to reduce wear, because of slight variations in pressure.
