# Why do we need a starter to start a DC motor?

**URL:** <https://forumautomation.com/t/why-do-we-need-a-starter-to-start-a-dc-motor/12264>\
**Category:** Electrical\
**Tags:** motor\
**Created:** [July 8, 2024, 6:54pm UTC](https://forumautomation.com/t/why-do-we-need-a-starter-to-start-a-dc-motor/12264 "2024-07-08T18:54:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [July 8, 2024, 6:54pm UTC](https://forumautomation.com/t/why-do-we-need-a-starter-to-start-a-dc-motor/12264/1 "2024-07-08T18:54:16Z")

</div>

Why do we need a starter to start a DC motor ?

 ![IMG_20240709_001745](https://cdn.forumautomation.com/original/2X/e/e3f43d7b15959f41ada45c8dc8dbf832a8ebafad.jpeg)

---

<div class="post-metadata">

**Author:** ![Raj54](https://forumautomation.com/letter_avatar_proxy/v4/letter/r/a88e4f/32.png) [@Raj54](https://forumautomation.com/u/Raj54)\
**Post date:** [July 9, 2024, 3:35am UTC](https://forumautomation.com/t/why-do-we-need-a-starter-to-start-a-dc-motor/12264/2 "2024-07-09T03:35:23Z")

</div>

Starter is used to limit the starting inrush current to prevent motor winding from daamage

---

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [July 10, 2024, 5:24am UTC](https://forumautomation.com/t/why-do-we-need-a-starter-to-start-a-dc-motor/12264/3 "2024-07-10T05:24:46Z")

</div>

A DC motor requires a starter for various crucial reasons:

**1). To control the initial inrush current:** When a DC motor is started, there is no back electromotive force (EMF) as the rotor is stationary. This absence of back EMF results in a high initial current, known as inrush current, which can be damaging to the motor’s components and power supply due to excessive voltage drops.

**2). To protect the motor:** The high inrush current can lead to overheating, potentially damaging the motor’s insulation and shortening its lifespan. A starter helps in gradually increasing the current, safeguarding the motor from thermal stress.

**3). To ensure smooth acceleration:** A starter enables the motor to smoothly increase its speed, preventing mechanical stress on both the motor and the connected load. This controlled acceleration contributes to a longer lifespan for the equipment.

**4). To maintain system stability:** In a complex system with multiple motors and electrical devices, starting a DC motor without a starter can cause instability in the power supply, resulting in voltage sags and affecting other equipment.

**5). To comply with safety standards:** Many safety regulations mandate the use of starters to limit inrush current and protect the motor and electrical system from damage.

Various types of starters are available for **[DC motors](https://forumelectrical.com/qsm_quiz/dc-motors-mcq/)** , such as

- Resistor starters,
- Autotransformer starters, and
- Electronic starters,

each serving the purpose of controlling the motor’s initial current and ensuring its safe operation.

There are various types of starting methods for DC motors, which include:

## 1). Resistor Starters

Incorporate resistors in the armature circuit to restrict the initial current flow.

These resistors are progressively bypassed as the motor accelerates.

## 2). Autotransformer Starters

Employ an autotransformer to decrease the initial voltage supplied to the motor, thus limiting the initial current.

## 3). Electronic Starters

Make use of power electronics to regulate the voltage and current delivered to the motor, enabling precise management of the starting sequence.

The utilization of a starter guarantees that the DC motor commences operation safely, functions effectively, and has an extended operational lifespan.

You can also follow us on **[AutomationForum.co](https://automationforum.co/)**, **[Facebook](https://www.facebook.com/instrumentation.control)** and **[Linkedin](https://www.linkedin.com/showcase/81532759/feed/posts/)** to receive daily Instrumentation updates.

You can also follow us on **[ForumElectrical.com](https://forumelectrical.com/)**, **[Facebook](https://www.facebook.com/profile.php?id=100091841583670)** and **[Linkedin](https://www.linkedin.com/showcase/91130242/feed/posts/)** to receive daily Electrical updates.
