# Why do Neutral and Ground have 175 VAC?

**URL:** <https://forumautomation.com/t/why-do-neutral-and-ground-have-175-vac/12105>\
**Category:** Electrical\
**Tags:** protection\
**Created:** [May 28, 2024, 2:30pm UTC](https://forumautomation.com/t/why-do-neutral-and-ground-have-175-vac/12105 "2024-05-28T14:30:57Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [May 28, 2024, 2:30pm UTC](https://forumautomation.com/t/why-do-neutral-and-ground-have-175-vac/12105/1 "2024-05-28T14:30:58Z")

</div>

A 175 VAC (volts alternating current) across neutral and ground indicates a major electrical fault. Under typical conditions, there should be a small to no voltage differential between neutral and ground.

 ![image](https://cdn.forumautomation.com/original/2X/b/bbf740b399928ef14dd376fb45f03afa546f6413.png)

## Causes

There are some possible reasons for this high voltage reading:

### Open Neutral

An open (or) broken neutral wire can disrupt the voltage distribution. This can result in unexpectedly high voltage between neutral & ground.

### Poor Grounding

Insufficient or defective grounding can cause a considerable voltage differential between neutral and earth.

Proper grounding ensures safety by creating a path for fault currents.

### Faulty Equipment

A malfunctioning electrical device or equipment could be creating the high voltage.

Faulty appliances can cause an aberrant voltage potential between the neutral and ground.

### Incorrect Wiring

Wiring faults, such as inverted neutral and hot wires, might result in unexpected voltage levels. Ensure that all connections are properly and securely formed.

### Induced Voltage

In rare conditions, electromagnetic interference (or) inductive coupling from neighboring high voltage lines or equipment may result in a voltage between neutral and ground.

## Solution

### Immediate Safety Check

Turn off the concerned circuit and consult with a licensed electrician.

### Inspect Connections

Look for loose, corroded, (or) damaged connections at the breaker panel & outlets.

### Verify Grounding

Make that the grounding system is correctly developed and fulfills local electrical requirements.

### Test Equipment

Disconnect & test electrical devices to find any problems.

Safety comes first, thus professional testing and maintenance are required to avoid electrical dangers.
