# When loading a Honeywell LM(Logic Manager), get UCN COMM ERROR (TDC 3000)

**URL:** <https://forumautomation.com/t/when-loading-a-honeywell-lm-logic-manager-get-ucn-comm-error-tdc-3000/242>\
**Category:** Honeywell\
**Created:** [February 11, 2015, 4:20am UTC](https://forumautomation.com/t/when-loading-a-honeywell-lm-logic-manager-get-ucn-comm-error-tdc-3000/242 "2015-02-11T04:20:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![omega](https://forumautomation.com/letter_avatar_proxy/v4/letter/o/a6a055/32.png) [@omega](https://forumautomation.com/u/omega)\
**Post date:** [February 11, 2015, 4:20am UTC](https://forumautomation.com/t/when-loading-a-honeywell-lm-logic-manager-get-ucn-comm-error-tdc-3000/242/1 "2015-02-11T04:20:10Z")

</div>

Doing the Prog. Load operation getting the PI from the HM and the DATA BASE from removable media, the error occurs prior to asking for the DATA BASE. The exact cause is unknown

---

<div class="post-metadata">

**Author:** ![omega](https://forumautomation.com/letter_avatar_proxy/v4/letter/o/a6a055/32.png) [@omega](https://forumautomation.com/u/omega)\
**Post date:** [February 11, 2015, 4:27am UTC](https://forumautomation.com/t/when-loading-a-honeywell-lm-logic-manager-get-ucn-comm-error-tdc-3000/242/2 "2015-02-11T04:27:32Z")

</div>

Pull the LM battery and power down the LM rack to purge the LM memory. Insert the battery, power the rack back up and reload again. The LM should come to IDLE (with or without DATA depending on the existance of the checkpoint file)."
