# When is a Disconnector placed between 2 Circuit Breakers in a Substation?

**URL:** <https://forumautomation.com/t/when-is-a-disconnector-placed-between-2-circuit-breakers-in-a-substation/13264>\
**Category:** Electrical\
**Tags:** switchgear\
**Created:** [May 21, 2025, 1:44pm UTC](https://forumautomation.com/t/when-is-a-disconnector-placed-between-2-circuit-breakers-in-a-substation/13264 "2025-05-21T13:44:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [May 21, 2025, 1:44pm UTC](https://forumautomation.com/t/when-is-a-disconnector-placed-between-2-circuit-breakers-in-a-substation/13264/1 "2025-05-21T13:44:30Z")

</div>

# What is Disconnector?

A disconnector (also known as an isolator) is often positioned between two circuit breakers in a substation under particular conditions to give visible isolation & safe maintenance access to equipment.

 ![image](https://cdn.forumautomation.com/original/2X/3/31bb253b7f75481ed256cdde03d5abc1ec54a5eb.jpeg)

The following are the key conditions in which this arrangement is used:

# 1). Busbar Configuration

In double busbar (or) double breaker systems, a disconnector between two circuit breakers enables circuit switching or isolation for maintenance without disturbing the entire system. This design provides operational flexibility & redundancy.

# 2). Maintenance & Safety

When doing maintenance on a circuit breaker or substation section, the disconnector creates a visible break in circuit to ensure safety. Circuit breakers can halt current, yet they don’t leave a visible gap, thus disconnectors are employed.

# 3). Sectionalizing

In ring bus (or) breaker-and-a-half arrangements, disconnectors are installed between breakers to sectionalize the bus or isolate a portion of the system while keeping the rest operational.

# 4). Fail-safe Isolation

To isolate a malfunctioning circuit breaker from the rest of the system, place a disconnector across two breakers. This is particularly beneficial in sensitive installations if fault tolerance is required.

# 5). Redundancy in Protection

To ensure double redundancy, two breakers may be utilized for a single line (or) transformer, with a disconnector in between for controlled isolation without halting the entire load.

Disconnectors should only be used when the circuit is de-energized, as they are not meant to interrupt current and lack the arc-quenching capabilities of circuit breakers.
