# When is a control valve used without a positioner?

**URL:** <https://forumautomation.com/t/when-is-a-control-valve-used-without-a-positioner/8924>\
**Category:** Field Instrumentation\
**Created:** [December 7, 2020, 10:45am UTC](https://forumautomation.com/t/when-is-a-control-valve-used-without-a-positioner/8924 "2020-12-07T10:45:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [December 7, 2020, 10:45am UTC](https://forumautomation.com/t/when-is-a-control-valve-used-without-a-positioner/8924/1 "2020-12-07T10:45:46Z")

</div>

Can we use a control valve without a positioner

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [December 7, 2020, 10:59am UTC](https://forumautomation.com/t/when-is-a-control-valve-used-without-a-positioner/8924/2 "2020-12-07T10:59:10Z")

</div>

It would be used when the process is not being controlled for accuracy but just to get close to a number whether it be flow pressure or other forms. If you are talking about a globe style or v ball valve with an on/off actuator then without a positioner would either be to open a line to cause flow or close to stop the flow.

Actually, a control valve will operate as a modulated valve without a positioner attached to it but it will operate accordinfg to the I/P and of the bench set of actuator. It will not be as accurate without the positioner but will still function.

---

<div class="post-metadata">

**Author:** ![carl\_e](https://forumautomation.com/letter_avatar_proxy/v4/letter/c/94ad74/32.png) [@carl\_e](https://forumautomation.com/u/carl_e)\
**Post date:** [December 10, 2020, 1:49am UTC](https://forumautomation.com/t/when-is-a-control-valve-used-without-a-positioner/8924/3 "2020-12-10T01:49:49Z")

</div>

Valves used in HVAC usually do NOT have a positioner because of cost and the lack of need for precise action.
