# What would happen if there is a power failure during the operation of MOV

**URL:** <https://forumautomation.com/t/what-would-happen-if-there-is-a-power-failure-during-the-operation-of-mov/8821>\
**Category:** Field Instrumentation\
**Created:** [November 14, 2020, 10:33am UTC](https://forumautomation.com/t/what-would-happen-if-there-is-a-power-failure-during-the-operation-of-mov/8821 "2020-11-14T10:33:17Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [November 14, 2020, 10:33am UTC](https://forumautomation.com/t/what-would-happen-if-there-is-a-power-failure-during-the-operation-of-mov/8821/1 "2020-11-14T10:33:17Z")

</div>

**What is the Required voltage for the MOV, and what happens to MOV during power failure while it’s operating?**

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [November 14, 2020, 10:36am UTC](https://forumautomation.com/t/what-would-happen-if-there-is-a-power-failure-during-the-operation-of-mov/8821/2 "2020-11-14T10:36:21Z")

</div>

MOV is operated at 440 V Ac feedback supply 110, 24v dc or Ac power

During power failure condition it turns to stop position and can be manually operated with a hand wheel.

---

<div class="post-metadata">

**Author:** ![carl\_e](https://forumautomation.com/letter_avatar_proxy/v4/letter/c/94ad74/32.png) [@carl\_e](https://forumautomation.com/u/carl_e)\
**Post date:** [November 18, 2020, 12:38am UTC](https://forumautomation.com/t/what-would-happen-if-there-is-a-power-failure-during-the-operation-of-mov/8821/3 "2020-11-18T00:38:35Z")

</div>

When the primary power source to an electrical motor operated actuator is interrupted, the actuator motor stops where it is, unless there is battery back-up or a secondary power source.

The fail-safe setting for electric MOV’s that drives the motor to a fail-safe position is used when the position setpoint input signal is lost or fails. If the motor still has power when the input signal failes, then the actuator’s fail-safe system drives the motor to whatever fail-safe position is configured, which could fail-in-place or fail at a specified position.
