# What protocol does Allen Bradley PLC use?

**URL:** <https://forumautomation.com/t/what-protocol-does-allen-bradley-plc-use/14623>\
**Category:** Allen Bradly\
**Tags:** interviewquestions\
**Created:** [November 20, 2026, 5:02am UTC](https://forumautomation.com/t/what-protocol-does-allen-bradley-plc-use/14623 "2026-11-20T05:02:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Instrument\_Engineer](https://forumautomation.com/user_avatar/forumautomation.com/instrument_engineer/32/6734_2.png) [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Post date:** [November 20, 2026, 5:02am UTC](https://forumautomation.com/t/what-protocol-does-allen-bradley-plc-use/14623/1 "2026-11-20T05:02:48Z")

</div>

What protocol does Allen Bradley PLC use?

 ![image](https://cdn.forumautomation.com/original/2X/6/6028200ce47bcb195215af73f280898b92520a0d.jpeg)

---

<div class="post-metadata">

**Author:** ![Sundar\_Iyalunaidu](https://forumautomation.com/user_avatar/forumautomation.com/sundar_iyalunaidu/32/7404_2.png) [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Post date:** [November 20, 2026, 5:43am UTC](https://forumautomation.com/t/what-protocol-does-allen-bradley-plc-use/14623/2 "2026-11-20T05:43:16Z")

</div>

### **What Protocol Does Allen Bradley PLC Use?**

Allen Bradley PLCs primarily use EtherNet/IP for modern industrial communication. However, the protocol depends on the controller family, communication module, firmware, and connected equipment.

### **Common Allen Bradley Communication Protocols**

- **EtherNet/IP:** The widely used modern protocol. It carries Common Industrial Protocol (CIP) over Ethernet and supports PLC messaging, remote I/O, drives, HMIs, and SCADA.

- **ControlNet:** A scheduled network used in established systems requiring predictable communication between controllers and distributed devices.

- **DeviceNet:** A device level network traditionally connecting sensors, motor starters, drives, and field devices.

- **DF1:** A serial protocol found in legacy systems using RS232 interfaces.

- **DH+ and DH485:** Older networks encountered in existing PLC5 and SLC installations.

- **Modbus RTU or TCP:** Certain controller families support Modbus directly; others need suitable modules or gateways.

### **Which Protocol Should Engineers Select?**

For new ControlLogix or CompactLogix installations, EtherNet/IP is generally preferred when supported by the hardware.

Consider these factors:

- Controller and module compatibility.

- Required update rate and network loading.

- Cable distance and topology.

- Device interoperability and available drivers.

- Cybersecurity and diagnostics.

### **Practical Plant Example**

A CompactLogix PLC communicating with a variable frequency drive, remote I/O rack, and operator HMI can use EtherNet/IP. Engineers configure device addresses, connection parameters, and communication paths.

Important: Allen Bradley does not use one universal protocol across every PLC. Verify the controller catalog number and supported communication options before designing or troubleshooting a network installation in the plant.
