# What is Vibration Switch?

**URL:** <https://forumautomation.com/t/what-is-vibration-switch/878>\
**Category:** Field Instrumentation\
**Created:** [March 20, 2016, 5:29am UTC](https://forumautomation.com/t/what-is-vibration-switch/878 "2016-03-20T05:29:43Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [March 20, 2016, 5:29am UTC](https://forumautomation.com/t/what-is-vibration-switch/878/1 "2016-03-20T05:29:43Z")

</div>

**Vibration switch**

Vibration switch is not really a vibration sensor,but a shock sensor.It is relay that will latch over when it senses a large enough bump (or shock) in a specific direction.The output of the relay is used to trigger an alarm or a shutdown sequence.

The original idea is to shutdown the machine down before it damages itself.This is useful for machines that tend to abruptly lose or gain weight,like a propeller fan in a cooling tower.If a blade become loose,or if it picks up a rag,a fan would be so far out of balance that a severe shock pulse would be sensed by the switch.The relay would trip,disconnecting power to the motor and gearbox and prevent further damage to the fan.
