# What is the best possible position to mount an inductive proximity switch for obtaining speed feedback of 3 phase induction motor?

**URL:** <https://forumautomation.com/t/what-is-the-best-possible-position-to-mount-an-inductive-proximity-switch-for-obtaining-speed-feedback-of-3-phase-induction-motor/161>\
**Category:** Electrical\
**Created:** [November 28, 2014, 3:40am UTC](https://forumautomation.com/t/what-is-the-best-possible-position-to-mount-an-inductive-proximity-switch-for-obtaining-speed-feedback-of-3-phase-induction-motor/161 "2014-11-28T03:40:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrulover](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/3ab097/32.png) [@instrulover](https://forumautomation.com/u/instrulover)\
**Post date:** [November 28, 2014, 3:40am UTC](https://forumautomation.com/t/what-is-the-best-possible-position-to-mount-an-inductive-proximity-switch-for-obtaining-speed-feedback-of-3-phase-induction-motor/161/1 "2014-11-28T03:40:20Z")

</div>

the best possible position to mount an inductive proximity switch for obtaining speed feedback of 3 phase induction motor?

---

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [November 28, 2014, 3:41am UTC](https://forumautomation.com/t/what-is-the-best-possible-position-to-mount-an-inductive-proximity-switch-for-obtaining-speed-feedback-of-3-phase-induction-motor/161/2 "2014-11-28T03:41:18Z")

</div>

The motor shaft…if you are wanting to read the RPM of the motor itself. Generally I have installed a metal flag to act a target for an inductive prox to read properly. I don’t know what brand you are using but I recommend the Eaton iProx for these types of applications. It has a TEACH function that allows the sensor to detect only what you want it to.

If the speed is critical to your process you may want to use a rotary encoder instead…if just for reference, the inductive prox is a great choice.

Also, you mention using an induction motor - is this operated by a variable frequency drive? If so, most VFDs extrapolate RPM based on parameters and frequency reference.
