# What is Star-Delta connection?

**URL:** <https://forumautomation.com/t/what-is-star-delta-connection/2741>\
**Category:** Electrical\
**Tags:** electrical\
**Created:** [November 28, 2017, 8:56pm UTC](https://forumautomation.com/t/what-is-star-delta-connection/2741 "2017-11-28T20:56:43Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![sivaranjith](https://forumautomation.com/letter_avatar_proxy/v4/letter/s/ba9def/32.png) [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Post date:** [November 28, 2017, 8:56pm UTC](https://forumautomation.com/t/what-is-star-delta-connection/2741/1 "2017-11-28T20:56:44Z")

</div>

Star-Delta connection is a transformer winding connection, where primary winding is a star connection and secondary is a delta connection.

![](https://cdn.forumautomation.com/original/2X/5/53fdfbbcd9e0cfb8eb117c2b575453ef18c90539.png)

The primary star connection and the secondary delta connection is shown in above picture with its phasor diagram.

- The voltage at the primary side= Root 3 times phasor voltage

- There will -30 degree or +30 degree phase shift between primary voltage and secondary phase voltage.

This kind of connections are used to employe for power supply transmission and commonly used in step down transformer.

> **Star-delta as grounding transformer:**

 ![](https://cdn.forumautomation.com/original/2X/8/89b3f25e602970530acaa45b78d92ccd7fc182c3.png)

For power systems, star-delta transformers are used to provide a good ground source. The circuit for grounding system is shown in above picture. If it is required to connect phase-to-ground loads to this system a grounding bank is connected to the system, as shown in the above picture.

> **Advantages of star-delta connection:**

- The star connection on the primary side reduces the number of turns required. This makes the connection economical.

- Large unbalanced loads can be handled

- Allow both single phase and three phase load.

> **Disadvantages of star-delta connection:**

- Secondary voltage is not in phase with primary

- If secondary of this transformer should be paralleled with secondary of another transformer without phase shift, there would be a problem.

- Another problem is the primary voltage is shifted 30 degree with the secondary.
