# What is P&ID ? How to read a P&ID?

**URL:** <https://forumautomation.com/t/what-is-p-id-how-to-read-a-p-id/623>\
**Category:** Field Instrumentation\
**Created:** [November 28, 2015, 5:48am UTC](https://forumautomation.com/t/what-is-p-id-how-to-read-a-p-id/623 "2015-11-28T05:48:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [November 28, 2015, 5:48am UTC](https://forumautomation.com/t/what-is-p-id-how-to-read-a-p-id/623/1 "2015-11-28T05:48:49Z")

</div>

**What is P&ID?**

It stands for Piping and Instrumentation diagram.

It gives the over all idea about the process.

**Why to use P&ID?**

To describe over all plant and instrumentation.

It shows the flows in a plant and the corresponding sensors or other equipment.

It gives name to each sensors and other equipment along with their parameter.

**P&ID :**

The P&ID mixes pneumatic / hydraulic elements,electrical elements and instrumentation on the same diagram.

It uses a set of symbols defined in the ISA S5.1 standard

Examples of hydraulic / pneumatic symbols

 ![examples of P&ID symbols](https://cdn.forumautomation.com/original/1X/b368b235f68c13c0743fdf0af56b955d71eaab91.jpg)

**P&ID Should be included with**

All process equipment (With its tag number)

All pipes (With line number)

All valves with identification no along with their type and size should be shown.

Pumps with tag number

All control loops and instruments with identification.

**Common Connection Lines**

![P&ID Connection](https://cdn.forumautomation.com/original/1X/d2b9682b646d6fb270256d5682b838d0f5560d68.jpg)

**How to read P&ID ?**

Discrete instruments are indicated by circular elements

Shared control/display elements are circles surrounded by a square.

Computer functions are indicated by a hexagon

Programmable logic function are shown as a triangle inside a square.

 ![P&ID](https://cdn.forumautomation.com/original/1X/216261011711cf297994ac778301e9ddf56a6c17.jpg)

---

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [November 28, 2015, 5:56am UTC](https://forumautomation.com/t/what-is-p-id-how-to-read-a-p-id/623/2 "2015-11-28T05:56:59Z")

</div>

**TAG DESCRIPTORS**

 ![Tag descriptors](https://cdn.forumautomation.com/original/1X/1cc5a06d4105f83d07e56db69547af8cc4411de7.jpg)

1st letter

P - Pressure L - Level T - Temperature F - Flow

2nd Letter I - Indicator R - Recorder C - Controller T - Transmitter

INSTRUMENT LOCATION

 ![instrument location](https://cdn.forumautomation.com/original/1X/e1c381963e62dd565b4de83abd10bdf480101f65.jpg)

No Line - Instrument is mounted in the field near process (Close to the operator)

Solid line - The instrument is mounted in the control room (accessible to the operator)

Dotted line - The instrument is mounted out of sight (not accessible to the operator)
