# What is LOPA and SIS?

**URL:** <https://forumautomation.com/t/what-is-lopa-and-sis/1112>\
**Category:** Field Instrumentation\
**Created:** [June 26, 2016, 10:02pm UTC](https://forumautomation.com/t/what-is-lopa-and-sis/1112 "2016-06-26T22:02:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![automate](https://forumautomation.com/letter_avatar_proxy/v4/letter/a/51bf81/32.png) [@automate](https://forumautomation.com/u/automate)\
**Post date:** [June 26, 2016, 10:02pm UTC](https://forumautomation.com/t/what-is-lopa-and-sis/1112/1 "2016-06-26T22:02:07Z")

</div>

LOPA - Layer of protection analysis

A semi quantitative tool for analyzing and accessing process safety risks on a process unit Uses numerical technique to evaluate the adequacy of existing or proposed layers of protection against known hazards All LOPA starts with a determined consequences to defend against LOPAs are more Subjective than Objective

**LOPA Ratio**

-A mathematical factor that defines the amount of a safety gap -Feeds to the SIS side -Equal to SIS or SIS amounts -Higher the TMFL or consequence the larger the ratio and associated SIL to fill.

 ![LOPA process calculation](https://cdn.forumautomation.com/original/1X/3bd0b687aa6f24bfd04fc073fcf44603f92f9e7f.JPG)

---

<div class="post-metadata">

**Author:** ![automate](https://forumautomation.com/letter_avatar_proxy/v4/letter/a/51bf81/32.png) [@automate](https://forumautomation.com/u/automate)\
**Post date:** [June 26, 2016, 10:11pm UTC](https://forumautomation.com/t/what-is-lopa-and-sis/1112/2 "2016-06-26T22:11:41Z")

</div>

**SIS Process**

Safety Instrumented System -Consist of an engineered set of hardware and software controls that are defined as a critical system and this system will mitigate or stop a determined hazard in a process or unit. -A SIS is engineered to be independent and to perform specific control function -SIS is composed of sensors,logic solvers and end devices with connection system between each item.

SIS Process Calculation

![SIS process calculation](https://cdn.forumautomation.com/original/1X/a41c9890d0bd1ed20432cf358ed94e1a60e14794.JPG)
