# What is leakage class rating (Valve Design)?

**URL:** <https://forumautomation.com/t/what-is-leakage-class-rating-valve-design/1283>\
**Category:** Valves\
**Tags:** controlvalve\
**Created:** [August 28, 2016, 12:22am UTC](https://forumautomation.com/t/what-is-leakage-class-rating-valve-design/1283 "2016-08-28T00:22:35Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [August 28, 2016, 12:22am UTC](https://forumautomation.com/t/what-is-leakage-class-rating-valve-design/1283/1 "2016-08-28T00:22:35Z")

</div>

There are 6 leakage classes.

Most common are class 4 and Class 6.

Class 4 is intended for single ported,metal to metal seats.Leakage rate is limited to 0.01 of rated valve flow capacity.

Class 6 is intended for resilient seated valves. Leakage rate is determined by valve size on a variable scale. Typical soft seat materials are teflon and elastomer rubber.

**Control Valve Leakage Class Classification** Following information are given in the table. Leakage Class Designation Maximum Leakage allowable Test Medium Test Pressure Testing procedure required for establishing rating

 ![Control Valve Leakage Class Classification](https://cdn.forumautomation.com/original/1X/be2fe4c204ff35de59eeec6aec46e8311bf6757c.jpg)

Valve Seat Leakage Classification - Table

 ![Control Valve Seat Leakage Classification](https://cdn.forumautomation.com/original/1X/4a8c5873432a6c249cd2fd2ccd1f5873d6efd477.jpg)
