# What is Impedance?

**URL:** <https://forumautomation.com/t/what-is-impedance/14483>\
**Category:** Electrical\
**Tags:** basic\
**Created:** [October 8, 2026, 2:12pm UTC](https://forumautomation.com/t/what-is-impedance/14483 "2026-10-08T14:12:22Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [October 8, 2026, 2:12pm UTC](https://forumautomation.com/t/what-is-impedance/14483/1 "2026-10-08T14:12:23Z")

</div>

## What is Impedance?

Impedance (Z) is the total opposition in an AC circuit that blocks the flow of current (I). Both Resistance (R) and Reactance (X) are included in it.

**Impedance is the vector sum of Resistance and Reactance, representing the total opposition in an AC circuit.**

 ![3](https://cdn.forumautomation.com/original/2X/4/4e7a58c4a9bfb5a993b8c4ebc0c249502492596e.jpeg)

## Formula

**Z = √(R² + X²)**

**Z = R + jX**

Where:

Z = Impedance (Ω)

R = Resistance (Ω)

X = Reactance (Ω)

j = Imaginary Unit (√−1)

Impedance Triangle: Z = Impedance, X = Reactance, R = Resistance

tan φ = X / R

## What is Reactance?

Reactance (X) occurs in an AC circuit due to inductance (L) or capacitance (C).

Inductive Reactance: XL = 2πfL Ω

Capacitive Reactance: XC = 1 / (2πfC) Ω

Where:

f = Frequency (Hz)

L = Inductance (H)

C = Capacitance (F)

π = 3.1416

## Units

Impedance (Z) → Ohm (Ω)

Reactance (X) → Ohm (Ω)

Resistance (R) → Ohm (Ω)

## Phase Angle (φ)

The phase difference between Resistance and Reactance is called φ (Phi).

φ = tan⁻¹(X / R)

The higher the reactance, the higher the impedance will be.

Impedance is always greater than or equal to Resistance.

## Example

If: R = 10 Ω, X = 8 Ω

Reactance (X) = 8 Ω

Z = √(R² + X²)

Z = √(10² + 8²)

Z = √(100 + 64)

Z = √164 = 12.81 Ω

φ = tan⁻¹(X / R)

φ = tan⁻¹(8 / 10) = 38.66°

## Importance

Impedance is:

Very important in AC circuit analysis.

Used in power factor (PF) calculation.

Used in the design of transformers, motors, generators, and transmission lines.

## Note

DC circuits only have resistance; therefore:

Impedance = Resistance (Z = R)
