# What is Hysteresis and dead band in a control valve?

**URL:** <https://forumautomation.com/t/what-is-hysteresis-and-dead-band-in-a-control-valve/8877>\
**Category:** Field Instrumentation\
**Created:** [November 28, 2020, 5:52am UTC](https://forumautomation.com/t/what-is-hysteresis-and-dead-band-in-a-control-valve/8877 "2020-11-28T05:52:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [November 28, 2020, 5:52am UTC](https://forumautomation.com/t/what-is-hysteresis-and-dead-band-in-a-control-valve/8877/1 "2020-11-28T05:52:25Z")

</div>

Explain the hysteresis and dead band in the control valve

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [November 28, 2020, 6:29am UTC](https://forumautomation.com/t/what-is-hysteresis-and-dead-band-in-a-control-valve/8877/2 "2020-11-28T06:29:47Z")

</div>

Control valve Deadband is the range a measured signal can vary without initiating a response from the actuator. (hysteresis)Valve operates as per signal but not reverse as per signal.
