# What is High Voltage Current Transformer (CT)?

**URL:** <https://forumautomation.com/t/what-is-high-voltage-current-transformer-ct/14040>\
**Category:** Electrical\
**Tags:** electrical\
**Created:** [April 24, 2026, 6:47am UTC](https://forumautomation.com/t/what-is-high-voltage-current-transformer-ct/14040 "2026-04-24T06:47:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [April 24, 2026, 6:47am UTC](https://forumautomation.com/t/what-is-high-voltage-current-transformer-ct/14040/1 "2026-04-24T06:47:32Z")

</div>

# What is High Voltage Current Transformer (CT)?

A High Voltage **[Current Transformer (CT)](https://forumelectrical.com/magnetization-curve-of-current-transformer-ct-working-zones-and-importance/)** is an instrument transformer used in power systems to measure large currents and to provide protection in **[high voltage](https://forumelectrical.com/high-voltage-hv-motor-megger-test-procedure/)** networks safely.

It steps down very high current (like 200A, 1000A or more) to a small, standard value (usually 5A or 1A) for meters and protective relays.

## Purpose

**Measurement**

Used with ammeters, energy meters, and power meters.

**Protection**

Works with protective relays to detect faults (overcurrent, short circuit, etc.).

**Safety**

Isolates measuring instruments from high voltage lines.

## Where it is used?

Power transmission lines

Substations

Generator stations

Industrial high-voltage panels

For example, in a 33kV or 11kV substation, CTs are installed on outgoing feeders to monitor current.

 ![image](https://cdn.forumautomation.com/original/2X/a/aa7ff6d297dbd4fdd57acd05d1ad8474c0292158.jpeg)

## Working Principle

A CT works on the principle of electromagnetic induction (same idea as a normal transformer).

**Primary winding:** Connected in series with the high-voltage line (carries full load current).

**Secondary winding:** Connected to measuring devices (low current output like 5A or 1A).

If the primary current is 500A and the CT ratio is 500/5,

👉 When 500A flows in primary, 5A flows in secondary.

## Types of High Voltage CTs

## Oil-immersed CT

Used for very high voltages (e.g., 132kV and above).

## Dry-type CT

Used in indoor switchgear.

## Ring-type (Window CT)

Cable passes through the center.

## Bushing CT

Built inside **[transformer](https://forumelectrical.com/transformer-fuse-circuit-breaker-size-calculator/)** or **[circuit breaker](https://forumelectrical.com/acb-size-calculator/)** bushings.

Ratings

- Current ratio (e.g., 800/5A)
- Burden (VA rating)
- Accuracy class (e.g., 0.5, 1.0, 5P10)
- Insulation level (kV rating)
