# What is an SF and BF on a PLC module

**URL:** <https://forumautomation.com/t/what-is-an-sf-and-bf-on-a-plc-module/9235>\
**Category:** PLC (Programmable Logic Controllers)\
**Created:** [March 9, 2021, 10:49am UTC](https://forumautomation.com/t/what-is-an-sf-and-bf-on-a-plc-module/9235 "2021-03-09T10:49:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [March 9, 2021, 10:49am UTC](https://forumautomation.com/t/what-is-an-sf-and-bf-on-a-plc-module/9235/1 "2021-03-09T10:49:28Z")

</div>

What are SF&BF on a Siemens PLC module

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [March 9, 2021, 10:52am UTC](https://forumautomation.com/t/what-is-an-sf-and-bf-on-a-plc-module/9235/2 "2021-03-09T10:52:27Z")

</div>

SF indicates about system’s fault if the looping communication is not ok, and BF indicates if I/O not added in the assigned interface module. SF and BF are system fault and bus fault respectively. System fault has to do with hardware or program fault while bus fault has to do with communication fault.
