# What is a request-response mode in HART?

**URL:** <https://forumautomation.com/t/what-is-a-request-response-mode-in-hart/13206>\
**Category:** Industrial Networking\
**Tags:** interviewquestions\
**Created:** [April 29, 2025, 2:40am UTC](https://forumautomation.com/t/what-is-a-request-response-mode-in-hart/13206 "2025-04-29T02:40:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Instrument\_Engineer](https://forumautomation.com/user_avatar/forumautomation.com/instrument_engineer/32/6734_2.png) [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Post date:** [April 29, 2025, 2:40am UTC](https://forumautomation.com/t/what-is-a-request-response-mode-in-hart/13206/1 "2025-04-29T02:40:31Z")

</div>

What is a request-response mode in HART?

 ![image](https://cdn.forumautomation.com/original/2X/f/f6492498a69721c72ca2d23ada2664f9c2029204.jpeg)

---

<div class="post-metadata">

**Author:** ![Sundar\_Iyalunaidu](https://forumautomation.com/user_avatar/forumautomation.com/sundar_iyalunaidu/32/7404_2.png) [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Post date:** [May 10, 2025, 5:04am UTC](https://forumautomation.com/t/what-is-a-request-response-mode-in-hart/13206/2 "2025-05-10T05:04:31Z")

</div>

![image](https://cdn.forumautomation.com/original/2X/2/2d35d42d1654deb9bbba837ef646da70918ef29f.png)

Request-response mode in HART (Highway Addressable Remote Transducer) communication is a basic technique of data transfer whereby a master device starts communication by sending a request to a field device, which then replies with the desired data or an acknowledgment. This mode follows a master-slave communication model, meaning the slave device usually a transmitter or positioner only communicates when the master (such as a DCS, PLC, or handheld communicator) prompts it. Communication is strictly one transaction at a time; every master request must be answered before a new one can be started. This guarantees consistent and orderly data transfer, which is absolutely crucial in process automation systems. Reading process variables like pressure, temperature, or flow; accessing device configuration parameters; collecting diagnostic data; and carrying out maintenance activities are all done in the request-response mode. It supports a wide range of standard and device-specific commands described in the HART protocol, including reading the primary variable (Command 1) or device status (Command 48).

Applicable in both point-to-point and multi-drop network topologies, this mode permits two masters (primary and secondary) talking with the same field device in a time-shared manner, hence preserving system stability and data integrity.
