# What happens when a Transformer is Saturated?

**URL:** <https://forumautomation.com/t/what-happens-when-a-transformer-is-saturated/13286>\
**Category:** Electrical\
**Tags:** transformer\
**Created:** [May 29, 2025, 3:58pm UTC](https://forumautomation.com/t/what-happens-when-a-transformer-is-saturated/13286 "2025-05-29T15:58:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [May 29, 2025, 3:58pm UTC](https://forumautomation.com/t/what-happens-when-a-transformer-is-saturated/13286/1 "2025-05-29T15:58:01Z")

</div>

> # What happens when a Transformer is Saturated?

The transformer core is composed of ferromagnetic materials that become saturated at specific magnetic flux densities.

Increasing the mmf does not result in a corresponding rise in magnetic field flux (Φ).

 ![image](https://cdn.forumautomation.com/original/2X/9/934ae2c747c8405f5588468e2ea612b5c9252104.jpeg)

Each kind of core has its unique capacity to handle flux density.

The CRGO core has **1.8wb/m2.**

 

It also has its own saturation characteristics:

 

**Flux vs. Magnetizing Current,**

 

where flux depends on supply frequency,

 

**Flux = Voltage/Frequency**

 

If the frequency reaches 0, the core enters the saturation area.

 

**i.e.,** Pure D.C. supply has no frequency, so never try to supply D.C. to the transformer.

 

The same method The Imsin(**Ꝋ)** component is exactly proportional to flux, therefore once it increases to a certain level, the core will become saturated. where that is the power factor angle.
