# What are the two categories of Instrument transmitters?

**URL:** <https://forumautomation.com/t/what-are-the-two-categories-of-instrument-transmitters/934>\
**Category:** Field Instrumentation\
**Created:** [March 30, 2016, 4:26am UTC](https://forumautomation.com/t/what-are-the-two-categories-of-instrument-transmitters/934 "2016-03-30T04:26:26Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [March 30, 2016, 4:26am UTC](https://forumautomation.com/t/what-are-the-two-categories-of-instrument-transmitters/934/1 "2016-03-30T04:26:26Z")

</div>

Two categories of Instrument Transmitters are

1.Loop-powered 2.Non-Loop powered

**Loop Powered**

2 wire connection supplying both power and communication Power is supplied over the current loop from the control room Entire transmitter must operate on \<3.2 mA for a standard transmitter and \<2.7 mA for a HART enabled transmitter.

**Non-Loop powered**

4 wire connection,two for power and two for communication No power consumption limitations Used in situations where sufficient power cannot be derived from the current loop.
