# What are the supported inputs and outputs of FF positioner

**URL:** <https://forumautomation.com/t/what-are-the-supported-inputs-and-outputs-of-ff-positioner/8761>\
**Category:** Field Instrumentation\
**Created:** [October 30, 2020, 3:40pm UTC](https://forumautomation.com/t/what-are-the-supported-inputs-and-outputs-of-ff-positioner/8761 "2020-10-30T15:40:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [October 30, 2020, 3:40pm UTC](https://forumautomation.com/t/what-are-the-supported-inputs-and-outputs-of-ff-positioner/8761/1 "2020-10-30T15:40:08Z")

</div>

**Hart positioner supports 4-20mA input and 3-15 psi output then what about the FF positioner**

---

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [October 30, 2020, 3:44pm UTC](https://forumautomation.com/t/what-are-the-supported-inputs-and-outputs-of-ff-positioner/8761/2 "2020-10-30T15:44:02Z")

</div>

```
HART is just a communication protocol
4-20mA is a instrumentation, current input signal.

```

FF does not use current signal as instrumentation signal. It is a binary/digital signal code FF positioner input signal is digital PV and output is 3 to 15 PSI
