# What are the limitations of Modbus RTU?

**URL:** <https://forumautomation.com/t/what-are-the-limitations-of-modbus-rtu/1235>\
**Category:** Industrial Networking\
**Created:** [August 7, 2016, 8:03pm UTC](https://forumautomation.com/t/what-are-the-limitations-of-modbus-rtu/1235 "2016-08-07T20:03:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![automate](https://forumautomation.com/letter_avatar_proxy/v4/letter/a/51bf81/32.png) [@automate](https://forumautomation.com/u/automate)\
**Post date:** [August 7, 2016, 8:03pm UTC](https://forumautomation.com/t/what-are-the-limitations-of-modbus-rtu/1235/1 "2016-08-07T20:03:00Z")

</div>

Limitations of Modbus RTU

1.Maximum number of of devices - 32

Specification supports up to 247 slaves

Limited to 32 devices,per RS-485 standard

2.Limited distances

RS 232 - 25 ft (7.5 m) RS 485- 4000 ft(1.2 km)

3.Data access constraints

Single modbus master support only No provision for simultaneous SCADA /diagnostic access Difficult to implement “bumpless” SCADA redundancy
