# What are the Common NFPA 70E Violations?

**URL:** <https://forumautomation.com/t/what-are-the-common-nfpa-70e-violations/13327>\
**Category:** Electrical\
**Tags:** interviewquestions, electrical\
**Created:** [June 16, 2025, 4:50pm UTC](https://forumautomation.com/t/what-are-the-common-nfpa-70e-violations/13327 "2025-06-16T16:50:08Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [June 16, 2025, 4:50pm UTC](https://forumautomation.com/t/what-are-the-common-nfpa-70e-violations/13327/1 "2025-06-16T16:50:09Z")

</div>

> # Common NFPA 70E Violations:

**1). Failure to do an Arc Flash Risk Assessment**

**2). Inadequate or non-rated apparel in Arc Flash Zones**

**3). Working with Energized Equipment without Justification**

**4). Lack of Training**

**5). Inadequate (or) incomplete Lockout/Tagout (LOTO) Procedures**

**6). Unlabeled (or) Incorrectly Labeled Electrical Panels**

**7). Improper Maintenance of Electrical Equipment**

**8). Improper Utilization of Test Equipment**

**9). Inadequate Documentation**

**10). Unauthorized Persons in Electrical Areas**

 ![image](https://cdn.forumautomation.com/original/2X/3/30d18e8f6492710b3bdcc0b3d00b9476975f19c7.jpeg)

**1). Failure to do an Arc Flash Risk Assessment**

Not performing a proper arc flash analysis.

Using old (or) generic arc flash labels.

There is a lack of documentation regarding hazard boundaries & incident energy levels.

**2). Inadequate or non-rated apparel in Arc Flash Zones**

Avoid employing voltage-rated gloves, face shields, (or) balaclavas.

Using common apparel that can melt (or) ignite.

**3). Working with Energized Equipment without Justification**

Conducting maintenance (or) testing on active circuits without demonstrating that de-energization was not feasible.

There is no documented Energized Electrical Work Permit (EEWP).

**4). Lack of Training**

Employees have not been instructed on electrical risks, shock boundaries, or the proper use of personal protective equipment.

Training records are not maintained (or) updated at the required three-year interval.

**5). Inadequate (or) incomplete Lockout/Tagout (LOTO) Procedures**

Failure to isolate energy sources prior to starting work.

Incomplete or absent written LOTO plans.

Utilization of non-compliant locks and tags.

**6). Unlabeled (or) Incorrectly Labeled Electrical Panels**

Panels without arc flash markings or hazard warnings.

Voltage ratings and breaker schedules are incomplete.

**7). Improper Maintenance of Electrical Equipment**

Not maintaining breakers, switchgear, (or) transformers in accordance with manufacturer specifications.

Ignoring dust accumulation, corrosion, or loose connections, which enhance risk.

**8). Improper Utilization of Test Equipment**

Utilizing uncalibrated (or) non-rated meters to verify voltage.

To check the lack of electricity, skip the “live-dead-live” test method.

**9). Inadequate Documentation**

No Electrical Safety Program (ESP) is in existence.

There are no occupational safety plans or work justifications that are energized.

There are no records of training, audits, (or) PPE issue.

**10). Unauthorized Persons in Electrical Areas**

Non-qualified workers are permitted in restricted or electrified locations.

There are no signs or barriers surrounding live equipment.

> ### You can also follow us on [**AutomationForum.co**](https://automationforum.co/), [**Facebook**](https://www.facebook.com/instrumentation.control) and [**Linkedin**](https://www.linkedin.com/showcase/81532759/feed/posts/) to receive daily Instrumentation updates.

> ### You can also follow us on [**ForumElectrical.com**](https://forumelectrical.com/), [**Facebook**](https://www.facebook.com/profile.php?id=100091841583670) and [**Linkedin**](https://www.linkedin.com/showcase/91130242/feed/posts/) to receive daily Electrical updates.