# What are the 3 most common control valve flow characteristics?

**URL:** <https://forumautomation.com/t/what-are-the-3-most-common-control-valve-flow-characteristics/12918>\
**Category:** Valves\
**Tags:** interviewquestions\
**Created:** [December 25, 2024, 8:01am UTC](https://forumautomation.com/t/what-are-the-3-most-common-control-valve-flow-characteristics/12918 "2024-12-25T08:01:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Instrument\_Engineer](https://forumautomation.com/user_avatar/forumautomation.com/instrument_engineer/32/6734_2.png) [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Post date:** [December 25, 2024, 8:01am UTC](https://forumautomation.com/t/what-are-the-3-most-common-control-valve-flow-characteristics/12918/1 "2024-12-25T08:01:16Z")

</div>

What are the 3 most common control valve flow characteristics?

 ![image](https://cdn.forumautomation.com/original/2X/8/8d9be3fd87e9280ec336e63632ee556f2a578b53.jpeg)

---

<div class="post-metadata">

**Author:** ![automation\_engineer6](https://forumautomation.com/user_avatar/forumautomation.com/automation_engineer6/32/7656_2.png) [@automation\_engineer6](https://forumautomation.com/u/automation_engineer6)\
**Post date:** [January 8, 2025, 3:50am UTC](https://forumautomation.com/t/what-are-the-3-most-common-control-valve-flow-characteristics/12918/2 "2025-01-08T03:50:59Z")

</div>

To satisfy the needs of many applications, control valves are made with a range of flow characteristics. Fast opening, linear, and equal percentage are the three most prevalent flow characteristics. An outline of each is provided below, with straightforward explanations:

### 1. Quick Opening Characteristic

- A quick opening valve is made to permit significant amounts of flow with only a slight movement of the valve from the closed state. For instance, up to 90% of the maximum flow rate may be possible if the valve is opened halfway (50% lift).
- Usually, these valves are employed in “on/off” applications where prompt action is required but exact control is not. They are frequently operated by pneumatic or electrical means.
- Because the flow curve’s shape isn’t uniform, two fast-opening valves may operate marginally differently.
- Instead of being true fast-opening valves, some valves that resemble fast-opening valves but are capable of making tiny, accurate adjustments are better categorized as high-rangeability valves.

### 2. Linear Characteristic

- The relationship between the flow rate and the valve lift, or how much the valve is open, is constant with a linear valve. A valve that is 40% open, for instance, permits 40% of the maximum flow to go through.
- These are perfect for procedures that require a predictable flow rate change that is directly proportional to the movement of the valve.
- The orifice size, or the flow opening, is guaranteed to increase at the same rate as the valve lift by the design.

### 3. Equal Percentage Characteristic (Logarithmic)

- Instead of increasing the flow by a set amount, each step in valve lift with an equal percentage valve raises the flow by a percentage of the present flow rate. It is a logarithmic connection. The flow may double, for instance, if you increase the open from 10% to 20%, and the same doubling impact occurs between 20% and 40%.
- These valves are ideal for situations where controlling flow at lower levels requires minor adjustments to the valve position, whereas controlling high flows successfully requires more significant adjustments.
- This feature guarantees smooth operation across a broad range of flow rates and improves control at low flows.

### How to Choose the Right Flow Characteristic ?

- Fast Opening: For straightforward on/off control or situations requiring quick reaction, use this feature.
- Linear: Select when consistent and predictable flow changes require proportionate control.
- Equal Percentage: Ideal for systems that need precise management, particularly at lower flow levels, and have large flow rate variations.
