# Useful Electrical Formulas

**URL:** <https://forumautomation.com/t/useful-electrical-formulas/662>\
**Category:** Electrical\
**Created:** [December 13, 2015, 6:35am UTC](https://forumautomation.com/t/useful-electrical-formulas/662 "2015-12-13T06:35:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [December 13, 2015, 6:35am UTC](https://forumautomation.com/t/useful-electrical-formulas/662/1 "2015-12-13T06:35:14Z")

</div>

**Ohm’s Law**

I =E/R

or E = IR where I = current (amperes) E = electromotive force (volts) R = resistance (ohms)

 ![1](https://cdn.forumautomation.com/original/2X/f/fbe88d296ee974d64b54d48a3589bf4288c9a411.jpeg)

**Conductor Resistivity** R = ρ\*L/a

where ρ = specific resistance (or resistivity) (ohm metres, Ω·m) L = length (metres) a = area of cross-section (square metres) Temperature correction Rt = Ro (1 + αt) where Ro = resistance at 0ºC (Ω) Rt = resistance at tºC (Ω) α = temperature coefficient which has an average value for copper of 0.004 28 (Ω/ΩºC) R2 = R1 \* (1 +αt1 ) /(1+ αt2 )

where R1 = resistance at t1 (Ω) R2 = resistance at t2 (Ω)

α Values Ω/ΩºC copper 0.00428 platinum 0.00385 nickel 0.00672 tungsten 0.0045 aluminum 0.0040

**Alternating Current**

R.M.S. value of sine curve = 0.707 maximum value Mean value of sine curve = 0.637 maximum value Form factor of sinusoidal = RMS Value /Mean Value = 1.11

Frequency of alternator =pN/60 cycles per second Where p = number of pairs of poles N = rotational speed in r/min Instantaneous value = Maximum value × Sin (2πft) Note: calculator must be in radian mode

**Slip of Induction Motor**

((Slip speed of field - speed of rotor)/Speed of field) \* 100

**Current in AC Circuit**

Current = impressed volts/impedance

**Power Factor**

p.f. = true watts/(volts x amperes)

also p.f. = cos Φ, where Φ is the angle of lag or lead
