# Type of vibration measuring instrument is used on the compressors and the vibration measuring points

**URL:** <https://forumautomation.com/t/type-of-vibration-measuring-instrument-is-used-on-the-compressors-and-the-vibration-measuring-points/129>\
**Category:** Field Instrumentation\
**Created:** [October 3, 2014, 2:52pm UTC](https://forumautomation.com/t/type-of-vibration-measuring-instrument-is-used-on-the-compressors-and-the-vibration-measuring-points/129 "2014-10-03T14:52:59Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [October 3, 2014, 2:52pm UTC](https://forumautomation.com/t/type-of-vibration-measuring-instrument-is-used-on-the-compressors-and-the-vibration-measuring-points/129/1 "2014-10-03T14:52:59Z")

</div>

On a gas compressor shaft/bearing, measurement is carried out using a eddy probe displacement system. On each gas compressor, on both forward and aft radial bearings (journal bearing) two eddy probes are installed in the ‘x’ and ‘y’ positions.
