# Troubleshooting Connectivity Issues Between PLC and SCADA Systems Over Industrial Ethernet

**URL:** <https://forumautomation.com/t/troubleshooting-connectivity-issues-between-plc-and-scada-systems-over-industrial-ethernet/12606>\
**Category:** Industrial Networking\
**Created:** [September 20, 2024, 9:50pm UTC](https://forumautomation.com/t/troubleshooting-connectivity-issues-between-plc-and-scada-systems-over-industrial-ethernet/12606 "2024-09-20T21:50:29Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![picira](https://forumautomation.com/letter_avatar_proxy/v4/letter/p/cab0a1/32.png) [@picira](https://forumautomation.com/u/picira)\
**Post date:** [September 20, 2024, 9:50pm UTC](https://forumautomation.com/t/troubleshooting-connectivity-issues-between-plc-and-scada-systems-over-industrial-ethernet/12606/1 "2024-09-20T21:50:29Z")

</div>

Hello,

I’m experiencing intermittent connectivity drops between my PLC and SCADA systems over an Industrial Ethernet network. 🙃

The issue seems to occur sporadically; causing delays in data transfer and occasional timeouts. I’ve checked the physical connections; and cabling; but the problem persists.

Could this be related to network configuration ; bandwidth issues? I have checked [guide on networking in the automation sector documentation guide but still need help.

Any advice on how to diagnose and resolve this would be appreciated; particularly regarding the network settings or protocols (like Modbus/TCP or EtherNet/IP).

Thank you ! 🙂
