# Three-Phase Motor Power and Control Circuit

**URL:** <https://forumautomation.com/t/three-phase-motor-power-and-control-circuit/14551>\
**Category:** Electrical\
**Tags:** electrical\
**Created:** [October 28, 2026, 3:16pm UTC](https://forumautomation.com/t/three-phase-motor-power-and-control-circuit/14551 "2026-10-28T15:16:57Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [October 28, 2026, 3:16pm UTC](https://forumautomation.com/t/three-phase-motor-power-and-control-circuit/14551/1 "2026-10-28T15:16:57Z")

</div>

## Three-Phase Motor Power and Control Circuit

A three-phase **[motor control system](https://forumelectrical.com/how-to-wire-a-forward-and-reverse-motor-starter/)** integrates the power circuit, control circuit, and auxiliary DC supply to provide reliable motor operation, electrical protection, and operational safety.

The industrial electrical schematic includes the following components:

1. Three-Phase Power Circuit: 440 V AC supply, three-pole circuit breaker, contactor main contacts, thermal overload relay, and three-phase induction motor.
2. Control Circuit: 220 V AC control supply with control-circuit protection, START push button (NO), STOP push button (NC), emergency-stop contact (NC), contactor coil, and auxiliary holding contact (NO).
3. 24 V DC Power Supply: AC-to-DC switched-mode power supply for compatible sensors, PLC inputs, relays, or other control devices.
4. Motor Protection: Short-circuit protection through a suitably rated circuit breaker or fuses, and overload protection through a correctly selected thermal overload relay.
5. Indication and Status Monitoring: Pilot lamps for power availability, motor running status, and overload trip indication, using appropriate auxiliary contacts and control voltages.
6. Protective Earthing: Protective earth (PE) connection to the motor frame and conductive electrical enclosure for fault protection.
7. Electrical Panel Wiring: Clear separation and identification of power wiring, AC control wiring, and 24 V DC control wiring, with suitable terminals, cable sizing, and insulation ratings. The contactor’s auxiliary NO contact provides the seal-in function after the START push button is released. The STOP and emergency-stop contacts interrupt the contactor coil circuit to stop the motor. Where a risk assessment requires a safety-related emergency-stop function, an appropriately designed safety relay or safety controller may be necessary.

 ![1](https://cdn.forumautomation.com/original/2X/9/9df956addf34d6819d2a0f2500fa9ef3a48db455.jpeg)
