# Test Procedure for PEPPERL + FUCHS signal Splitter, Model: KFD2-STC4-Ex1.2O

**URL:** <https://forumautomation.com/t/test-procedure-for-pepperl-fuchs-signal-splitter-model-kfd2-stc4-ex1-2o/354>\
**Category:** Industrial Automation\
**Created:** [March 24, 2015, 7:00pm UTC](https://forumautomation.com/t/test-procedure-for-pepperl-fuchs-signal-splitter-model-kfd2-stc4-ex1-2o/354 "2015-03-24T19:00:18Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [March 24, 2015, 7:00pm UTC](https://forumautomation.com/t/test-procedure-for-pepperl-fuchs-signal-splitter-model-kfd2-stc4-ex1-2o/354/1 "2015-03-24T19:00:19Z")

</div>

Signal Splitter is used in automation applications.Following is the test procedure for the same:

Test Equipments used: Yokogawa calibrator (CA 71) Nagman Multimeter (VC 980+) Unotron power supply (0-30V DC)

Procedure: Feed the input across the terminals 1+ & 3- for sink mode and 3+ & 2- for source mode Vary the current from 0-20mA or 4-20mA across the input side and the corresponding output can be obtained from 8+ & 7- / 11+ & 10-. Hart signals can be obtained if the output is taken from 9 and 12 terminals of the model
