# Terms in a controller

**URL:** <https://forumautomation.com/t/terms-in-a-controller/96>\
**Category:** Industrial Automation\
**Created:** [October 3, 2014, 12:40pm UTC](https://forumautomation.com/t/terms-in-a-controller/96 "2014-10-03T12:40:27Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [October 3, 2014, 12:40pm UTC](https://forumautomation.com/t/terms-in-a-controller/96/1 "2014-10-03T12:40:27Z")

</div>

a)Measurement variable b)Desired variable c)Deviation d)Output

Measurement variable: It is the demand variable measured and controlled.

Desired Variable: it is the demand signal (set point) to which the process variable is controlled.

Deviation: it is the error signal caused by the difference between the measurement and the demand signal.

Output: It is the corrective signal from the controller to the final control element.
