# Solar PV System IEC Standards

**URL:** <https://forumautomation.com/t/solar-pv-system-iec-standards/14370>\
**Category:** Electrical\
**Tags:** solar, electrical\
**Created:** [September 10, 2026, 1:55am UTC](https://forumautomation.com/t/solar-pv-system-iec-standards/14370 "2026-09-10T01:55:23Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [September 10, 2026, 1:55am UTC](https://forumautomation.com/t/solar-pv-system-iec-standards/14370/1 "2026-09-10T01:55:23Z")

</div>

## Solar PV System IEC Standards

**[Solar photovoltaic (PV)](https://forumelectrical.com/solar-power-plant-bill-of-materials-bom-complete-procedure-for-installation-and-commissioning/)** systems are designed, installed, tested, monitored, and maintained according to various **[IEC standards](https://forumelectrical.com/iec-standards-chart/)**.

These standards cover PV array design, module safety, testing, installation, performance monitoring, maintenance, transportation and measurement methods.

## Key IEC Standards for Solar PV Systems

 **IEC 62548-1:2023** – _Photovoltaic (PV) Arrays – Part 1: Design Requirements_ Specifies requirements for the design of PV arrays and associated electrical components.

 **IEC 61730-1:2023** – _Photovoltaic (PV) Module Safety Qualification – Part 1: Requirements for Construction_ Covers construction requirements intended to ensure the safety of PV modules.

 **IEC 61730-2:2023** – _Photovoltaic (PV) Module Safety Qualification – Part 2: Requirements for Testing_ Defines safety testing requirements for PV modules.

 **IEC 61730-2:2023 RLV** – _Photovoltaic (PV) Module Safety Qualification – Part 2: Requirements for Testing_ Redline version of the applicable IEC 61730-2 standard.

 **IEC TS 61836:2016** – _Solar Photovoltaic Energy Systems – Terms, Definitions and Symbols_ Provides terminology, definitions, and symbols used in solar PV systems.

 **IEC 60364-7-712:2017** – _Low-Voltage Electrical Installations – Part 7-712: Requirements for Special Installations or Locations – Solar Photovoltaic (PV) Power Supply Systems_ Provides requirements for electrical installations incorporating PV power supply systems.

 **IEC 62805-2:2017** – _Method for Measuring Photovoltaic (PV) Glass – Part 2: Measurement of Transmittance and Reflectance_ Specifies methods for measuring the optical transmittance and reflectance of PV glass.

 **IEC 62446-1:2016** – _Photovoltaic (PV) Systems – Requirements for Testing, Documentation and Maintenance – Part 1: Grid-Connected Systems – Documentation, Commissioning Tests and Inspection_ Covers system documentation, commissioning tests, and inspection requirements for grid-connected PV systems.

 **IEC 62759-1:2022** – _Photovoltaic (PV) Modules – Transportation Testing – Part 1: Transportation and Shipping of Module Package Units_ Specifies transportation and shipping tests for packaged PV modules.

 **IEC 61724-1:2021** – _Photovoltaic System Performance – Part 1: Monitoring_ Defines procedures and equipment for monitoring PV system performance.

 **IEC 62446-2:2020** – _Photovoltaic (PV) Systems – Requirements for Testing, Documentation and Maintenance – Part 2: Grid-Connected Systems – Maintenance of PV Systems_ Provides guidance and requirements for the maintenance of grid-connected PV systems.

 **IEC 60904-8:2014** – _Photovoltaic Devices – Part 8: Measurement of Spectral Responsivity of a Photovoltaic (PV) Device_ Covers methods for measuring the spectral responsivity of PV devices.

 **IEC TS 60904-13:2018** – _Photovoltaic Devices – Part 13: Electroluminescence of Photovoltaic Modules_ Addresses electroluminescence testing and evaluation of PV modules.

 **IEC 63202-1:2019** – _Photovoltaic Cells – Part 1: Measurement of Light-Induced Degradation of Crystalline Silicon Photovoltaic Cells_ Specifies methods for measuring light-induced degradation in crystalline-silicon PV cells.

 **IEC TS 62804-2:2022** – _Photovoltaic (PV) Modules – Test Methods for the Detection of Potential-Induced Degradation – Part 2: Thin-Film_ Provides test methods for detecting potential-induced degradation in thin-film PV modules.

 **IEC 60904-1:2020** – _Photovoltaic Devices – Part 1: Measurement of Photovoltaic Current-Voltage Characteristics_ Specifies methods for measuring the current-voltage characteristics of PV devices.

 **IEC 62253:2011** – _Photovoltaic Pumping Systems – Design Qualification and Performance Measurements_ Covers design qualification and performance measurement of PV-powered pumping systems.

 **IEC TS 62804-1-1:2020** – _Photovoltaic (PV) Modules – Test Methods for the Detection of Potential-Induced Degradation – Part 1-1: Crystalline Silicon – Delamination_ Addresses testing for potential-induced degradation and delamination in crystalline-silicon PV modules.

 **IEC 60904-9:2007** – _Photovoltaic Devices – Part 9: Solar Simulator Performance Requirements_ Defines performance requirements for solar simulators used for PV device testing.

 **IEC TS 63019:2019** – _Photovoltaic Power Systems (PVPS) – Information Model for Availability_ Defines an information model for representing and evaluating PV system availability.

 ![1](https://cdn.forumautomation.com/original/2X/9/91f87454f9e09ae7a99447e5b3e81aa66044c220.jpeg)

 **IEC 60904-4:2009** – _Photovoltaic Devices – Part 4: Reference Solar Devices – Procedures for Establishing Calibration Traceability_ Specifies procedures for establishing calibration traceability for reference solar devices.

 **IEC 61215-1:2021** – _Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval – Part 1: Test Requirements_ Specifies test requirements for design qualification and type approval of terrestrial PV modules.

 **IEC 62109-2:2011** – _Safety of Power Converters for Use in Photovoltaic Power Systems – Part 2: Particular Requirements for Inverters_ Covers specific safety requirements applicable to PV inverters and other power-conversion equipment.

 **IEC 60904-1-1:2017** – _Photovoltaic Devices – Part 1-1: Measurement of Current-Voltage Characteristics of Multi-Junction Photovoltaic (PV) Devices_ Specifies measurement methods for the current-voltage characteristics of multi-junction PV devices.

These IEC standards collectively address the design, construction, safety, installation, testing, transportation, performance monitoring, maintenance, and measurement of solar PV systems and components. Selecting the applicable standard depends on the type of PV equipment, system configuration, testing activity, and project requirements.

**Note:** IEC standards are periodically revised or replaced. Always verify the current edition and applicability with IEC and the relevant national/local requirements before using a standard for engineering or compliance purposes.
