# Siemens PLC S400 Addresses 2 and 3 reserved?

**URL:** <https://forumautomation.com/t/siemens-plc-s400-addresses-2-and-3-reserved/480>\
**Category:** Siemens\
**Created:** [August 5, 2015, 11:44pm UTC](https://forumautomation.com/t/siemens-plc-s400-addresses-2-and-3-reserved/480 "2015-08-05T23:44:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![TheFlem](https://forumautomation.com/letter_avatar_proxy/v4/letter/t/4bbf92/32.png) [@TheFlem](https://forumautomation.com/u/TheFlem)\
**Post date:** [August 5, 2015, 11:44pm UTC](https://forumautomation.com/t/siemens-plc-s400-addresses-2-and-3-reserved/480/1 "2015-08-05T23:44:50Z")

</div>

Hi there, I have a Step 7 PLC S400, I know Slots 2 and 3 are reserved making the first I/O slot 4, however, when I assign a module to slot 4 the address defaults to I0 and I1, I de-select the DEFAULT ADDRESS check mark and change to I2 and I3 and everything works. Today I have the first input module at I0 and I1 and the second at I2 and I3 everything works, but a co-worker is telling me I can’t use I2 and I3 it is reserved, I think he is confusing Slots 2 and 3, not addresses. Then I see the the default is I0 and I1 for the first slot, then I4 and I5 on the second slot??? why not 2 and 3

Are they really “reserved”? and why does 2 and 3 work?

Also, can I get a better description of the ethernet ports P1 and P2, is there an internal switch,? either port connects automatically to my lap top.

Thanks

[theflem1@yahoo.com](mailto:theflem1@yahoo.com)
