# Selection of a level switch for a particular process

**URL:** <https://forumautomation.com/t/selection-of-a-level-switch-for-a-particular-process/61>\
**Category:** Level Measurement\
**Created:** [October 2, 2014, 5:46pm UTC](https://forumautomation.com/t/selection-of-a-level-switch-for-a-particular-process/61 "2014-10-02T17:46:06Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [October 2, 2014, 5:46pm UTC](https://forumautomation.com/t/selection-of-a-level-switch-for-a-particular-process/61/1 "2014-10-02T17:46:06Z")

</div>

While selecting a level switch, the following points are to be considered:

- The characteristic of process (corrosive or non – corrosive)
- The process pressure
- The liquid density
- The flange ratings
- Proof pressure of the switch
- The micro switch contact rating
