# SAES Standards - High Voltage (HV) Substations

**URL:** <https://forumautomation.com/t/saes-standards-high-voltage-hv-substations/13053>\
**Category:** Electrical\
**Tags:** electrical\
**Created:** [February 24, 2025, 4:49pm UTC](https://forumautomation.com/t/saes-standards-high-voltage-hv-substations/13053 "2025-02-24T16:49:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [February 24, 2025, 4:49pm UTC](https://forumautomation.com/t/saes-standards-high-voltage-hv-substations/13053/1 "2025-02-24T16:49:04Z")

</div>

The SAES (Saudi Aramco Engineering Standards) for high-voltage substations ensure compliance with local and international standards, focusing on safety, reliability, and efficiency.

 ![2](https://cdn.forumautomation.com/original/2X/9/96bd3ffb4d6c0ab85e46b504a8a3a4d870c26af6.jpeg)

Key SAES standards for high-voltage substations include:

> # SAES-P-100: Basic Power System Design Criteria

- Establishes guidelines for the overall design of power systems, including load flow, short-circuit analysis, and system stability.
- Includes fault level calculations and coordination with protection systems.

> # SAES-P-101: Medium and High Voltage Power Systems Design

- Covers design requirements for power systems exceeding 1 kV.
- Focuses on voltage selection, system earthing, and redundancy requirements.
- Ensures proper sizing and layout for transformers, switchgear, and feeders.

> # SAES-P-104: Wiring Methods and Materials

- Specifies acceptable wiring methods, including conduits, cable trays, and junction boxes.
- Defines requirements for cable insulation, bending radius, and installation practices.

> # SAES-P-114: Insulation Coordination and Equipment Ratings

- Provides guidance for selecting equipment ratings, including voltage, current, and withstand capabilities.
- Aligns with IEC 60071 (Insulation Coordination).

> # SAES-P-119: Power System Substations

- Governs the design, construction, and operation of substations.
- Includes specifications for layout, busbar configurations, and clearances.
- Focuses on safety measures, including fire protection and physical security.

> # SAES-P-121: High Voltage Cable Systems

- Specifies the installation, termination, and testing of high-voltage cables.
- Covers cable joints, accessories, and compliance with IEC 60840 for cables exceeding 30 kV.
- Emphasizes testing methods, including high-potential (Hi-Pot) and partial discharge testing.

> # SAES-P-123: High Voltage Transformers and Reactors

- Details specifications for power transformers and shunt reactors.
- Includes requirements for losses, cooling methods, and protection systems.
- Covers factory and site testing in compliance with IEC 60076.

> # SAES-P-124: Surge Protection Devices

- Guides the selection and application of surge arresters to protect against transient over voltages.
- Aligns with IEC 60099 for metal-oxide surge arresters.
- Specifies installation locations and testing requirements.

> # SAES-P-127: Testing and Commissioning of Substation Equipment

- Outlines procedures for testing and commissioning all substation components.
- Includes functional testing for switchgear, transformers, relays, and control systems.

> # SAES-P-136: Substation Automation Systems (SAS)

- Specifies requirements for automation, including SCADA integration, communication protocols, and cybersecurity.
- Aligns with IEC 61850 for substation communication networks.
