# Revolutions control in motor

**URL:** <https://forumautomation.com/t/revolutions-control-in-motor/1967>\
**Category:** Uncategorized\
**Created:** [May 5, 2017, 6:39pm UTC](https://forumautomation.com/t/revolutions-control-in-motor/1967 "2017-05-05T18:39:35Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![martynastirlikas](https://forumautomation.com/letter_avatar_proxy/v4/letter/m/3ec8ea/32.png) [@martynastirlikas](https://forumautomation.com/u/martynastirlikas)\
**Post date:** [May 5, 2017, 6:39pm UTC](https://forumautomation.com/t/revolutions-control-in-motor/1967/1 "2017-05-05T18:39:36Z")

</div>

Hello everyone,

I have a problem with counting difference between revolutions of pulleys. They are powered by one motor, 2nd pulley is drive by the 1st one, and I need to count the revolutions difference then the 1st pulley reaches 100 revolutions. The difference JUST at that moment! Everything must be done with INSTRUCTION LIST, and how to load a signal in IL that only when CTU of 1st pulleys Q gives 1, I could take the difference between 2nd and 1st? To make it easier to understand what I am talking about, I give my FBD program in here:

 ![](https://cdn.forumautomation.com/original/1X/113469c35f6f55f18fd00545bf20ed3f7d662b1b.png)
