# Remote seal diaphram Type Level Measurement

**URL:** <https://forumautomation.com/t/remote-seal-diaphram-type-level-measurement/6694>\
**Category:** Field Instrumentation\
**Tags:** level-measurement\
**Created:** [July 8, 2019, 3:52am UTC](https://forumautomation.com/t/remote-seal-diaphram-type-level-measurement/6694 "2019-07-08T03:52:09Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![murtaza\_salim](https://forumautomation.com/user_avatar/forumautomation.com/murtaza_salim/32/3987_2.png) [@murtaza\_salim](https://forumautomation.com/u/murtaza_salim)\
**Post date:** [July 8, 2019, 3:52am UTC](https://forumautomation.com/t/remote-seal-diaphram-type-level-measurement/6694/1 "2019-07-08T03:52:09Z")

</div>

Diaphram LT is used to measure ammonia tank level at a nominal 37% level. It was observed that despite the level increase, the level was stuck at 37% causing ammonia overflow. When we reduced the level, the response of the LT got normal. Still we cant figure out what caused the issue. Any idea?