# Radial, Velocity & Acceleration

**URL:** <https://forumautomation.com/t/radial-velocity-acceleration/121>\
**Category:** Field Instrumentation\
**Created:** [October 3, 2014, 2:35pm UTC](https://forumautomation.com/t/radial-velocity-acceleration/121 "2014-10-03T14:35:24Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [October 3, 2014, 2:35pm UTC](https://forumautomation.com/t/radial-velocity-acceleration/121/1 "2014-10-03T14:35:24Z")

</div>

Radial: A vibration measurement across the radius of a rotating shaft. It is measured in terms of Micron. The sensitivity of a radial vibration pickup (eddy probe) is 200mv DC/mill (refer to the drawings for the exact parameters).

Velocity: It is defined as the rate of change of distance travelled by the equipment. Velocity measurement is generally used for measuring the equipment body vibration. The sensitivity of a velocity pickup is 500mv DC/inch/sec (refer to the manufacturer drawings for the exact parameters).

Acceleration: It is defined as the rate of change of velocity. Acceleration measurement is generally used for measuring the equipment body vibration. The sensitivity of a velocity pickup is 100mv DC/inch/sec2 (refer to the manufacturer drawings for the exact parameters).
