# Radar level transmitter error

**URL:** <https://forumautomation.com/t/radar-level-transmitter-error/8885>\
**Category:** Field Instrumentation\
**Created:** [November 30, 2020, 5:19am UTC](https://forumautomation.com/t/radar-level-transmitter-error/8885 "2020-11-30T05:19:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [November 30, 2020, 5:19am UTC](https://forumautomation.com/t/radar-level-transmitter-error/8885/1 "2020-11-30T05:19:07Z")

</div>

**The radar level transmitter in furnace oil tank shows error ( using this for tank mass measurement in KG mass varies continuously without any loading and unloading)when the material temperature varies.**

**How to overcome this. should i go for DP level transmitter…during operation the temperature is maintained between 35 to 65 degree Celsius**

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [November 30, 2020, 5:27am UTC](https://forumautomation.com/t/radar-level-transmitter-error/8885/2 "2020-11-30T05:27:20Z")

</div>

Check the name plate & see the temperature, if oil temperature high then name plate temperature, so possible variation. Clean the metal part and antenna. Power reset.

---

<div class="post-metadata">

**Author:** ![carl\_e](https://forumautomation.com/letter_avatar_proxy/v4/letter/c/94ad74/32.png) [@carl\_e](https://forumautomation.com/u/carl_e)\
**Post date:** [December 4, 2020, 3:56am UTC](https://forumautomation.com/t/radar-level-transmitter-error/8885/3 "2020-12-04T03:56:38Z")

</div>

Your mass value is inferred by a calculation. You are not weighing the fuel which would give you a true mass value; you’re measuring level and multiplying by some factor and giving it the title “mass”.

Of course the mass value changes when the level changes; level is the base measured value and there’s just a multiplying factor involved. The common factor is in the math ! !
