# R301 release HTML graphics in R201 release of Honeywell Experion DCS

**URL:** <https://forumautomation.com/t/r301-release-html-graphics-in-r201-release-of-honeywell-experion-dcs/181>\
**Category:** Honeywell\
**Created:** [December 6, 2014, 4:45pm UTC](https://forumautomation.com/t/r301-release-html-graphics-in-r201-release-of-honeywell-experion-dcs/181 "2014-12-06T16:45:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![omega](https://forumautomation.com/letter_avatar_proxy/v4/letter/o/a6a055/32.png) [@omega](https://forumautomation.com/u/omega)\
**Post date:** [December 6, 2014, 4:45pm UTC](https://forumautomation.com/t/r301-release-html-graphics-in-r201-release-of-honeywell-experion-dcs/181/1 "2014-12-06T16:45:04Z")

</div>

How can i open R301 release HTML graphics in R201 release of Honeywell Experion DCS?

---

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [December 6, 2014, 4:46pm UTC](https://forumautomation.com/t/r301-release-html-graphics-in-r201-release-of-honeywell-experion-dcs/181/2 "2014-12-06T16:46:08Z")

</div>

1. Open R301 HTML graphic file in notepad. (Uncheck box to avoid always open in note pad.)
2. Then search for text \<META CONTENT = 5.2 ……. (sometimes u will find 5.3)
3. Change that no to 4.7 for R210.
4. Save the changes and open the saved HTML file in R210 station window.

Without doing above changes, if u try to open R301 HTML graphics file in R210, then u will get error as version not supported.
