# Proportional band with an example

**URL:** <https://forumautomation.com/t/proportional-band-with-an-example/99>\
**Category:** Industrial Automation\
**Created:** [October 3, 2014, 12:45pm UTC](https://forumautomation.com/t/proportional-band-with-an-example/99 "2014-10-03T12:45:59Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [October 3, 2014, 12:45pm UTC](https://forumautomation.com/t/proportional-band-with-an-example/99/1 "2014-10-03T12:45:59Z")

</div>

It is the range in percentage for which the controller output changes proportionally from minimum to maximum and vice-versa when the measurement deviates from the set point.

For example: A controller set at 50% proportional band The controller output changes from minimum to maximum and vice-versa when the measurement exceeds 25% either side of the set point depending on the controller action.
