# Problems related to temperature transmitter

**URL:** <https://forumautomation.com/t/problems-related-to-temperature-transmitter/9169>\
**Category:** Field Instrumentation\
**Created:** [February 16, 2021, 10:32am UTC](https://forumautomation.com/t/problems-related-to-temperature-transmitter/9169 "2021-02-16T10:32:51Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [February 16, 2021, 10:32am UTC](https://forumautomation.com/t/problems-related-to-temperature-transmitter/9169/1 "2021-02-16T10:32:52Z")

</div>

When we are measuring temperature from Honeywell STT 850 Temperature Transmitter…Pv unit is showing in mv. And now when we are trying to connect with Hart communicator and changing Pv unit to degree celcius, it is showing invalid selection .How can we change units to Degrees for the Transmitter

![image](https://cdn.forumautomation.com/original/2X/6/6b287b46d61c7a516f33ff9d2688a7d8aaf73108.jpeg)

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [February 16, 2021, 10:36am UTC](https://forumautomation.com/t/problems-related-to-temperature-transmitter/9169/2 "2021-02-16T10:36:59Z")

</div>

online

device setup

display setup

screen confirmation

configure

so configure again here change the unit

You have to change the unit, not the PV, just change the unit whatever you want, will find PV in the same unit.
