# Problems related to inverter

**URL:** <https://forumautomation.com/t/problems-related-to-inverter/9694>\
**Category:** Electrical\
**Created:** [August 4, 2021, 2:45am UTC](https://forumautomation.com/t/problems-related-to-inverter/9694 "2021-08-04T02:45:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [August 4, 2021, 2:45am UTC](https://forumautomation.com/t/problems-related-to-inverter/9694/1 "2021-08-04T02:45:00Z")

</div>

The inverter’s voltage drops from 240V to 110V while it is connected to the load, so what could be the problem

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [August 4, 2021, 2:47am UTC](https://forumautomation.com/t/problems-related-to-inverter/9694/2 "2021-08-04T02:47:30Z")

</div>

It’s a problem with the oscillator circuit. There’s no feedback to the oscillator making it an open-loop system. Feedback keeps the voltage constant irrespective of the load. It’s not the battery issue. If the battery is low, the voltage comparator circuit senses that without a voltage drop at the output, sends a signal to the user and later shut down the system by cutting power from the oscillator circuit but system output voltage remains constant all. Through. That’s what I feel is happening.
