# Problems related to connecting the modbus RS 485

**URL:** <https://forumautomation.com/t/problems-related-to-connecting-the-modbus-rs-485/9419>\
**Category:** Field Instrumentation\
**Created:** [May 20, 2021, 11:42am UTC](https://forumautomation.com/t/problems-related-to-connecting-the-modbus-rs-485/9419 "2021-05-20T11:42:43Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [May 20, 2021, 11:42am UTC](https://forumautomation.com/t/problems-related-to-connecting-the-modbus-rs-485/9419/1 "2021-05-20T11:42:44Z")

</div>

How to connect the Modbus RS 485 looping for SE Altivar12 and Altivar212 using the RJ-45 connection. I have used Blue and Blue white from RJ45 pin to RS 485 to USB converter to test on Modscan. It always shows device initializing. TIA

 ![image](https://cdn.forumautomation.com/original/2X/c/c7815d35f5b87d3c4137ff3ded4be815eb147616.jpeg)

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [May 20, 2021, 11:44am UTC](https://forumautomation.com/t/problems-related-to-connecting-the-modbus-rs-485/9419/2 "2021-05-20T11:44:44Z")

</div>

Depends on whether your cable and RJ485 are wired with those colors on those pins, I would just pick the 2 middle pins for transmitting/receive as per their diagram on your plug and 2 or 8 for ground. I would think that 5 is positive but if not just swap 5&4 around. I can’t understand how these companies can’t give a pinout that says pin x is ground, pin y is transmitted or + and pin z is negative - it’s not that hard

---

<div class="post-metadata">

**Author:** ![carl\_e](https://forumautomation.com/letter_avatar_proxy/v4/letter/c/94ad74/32.png) [@carl\_e](https://forumautomation.com/u/carl_e)\
**Post date:** [May 23, 2021, 2:31am UTC](https://forumautomation.com/t/problems-related-to-connecting-the-modbus-rs-485/9419/3 "2021-05-23T02:31:04Z")

</div>

Blue and Blue/white is conventional colors for pins 4 & 5.

The problem with EIA-485 is that the standard does not define which is A which is B and some vendors label the pins one way, other vendors label the pins the opposite. So although one is supposed connect (+) to (+), (-) to (-) or A to A, B to B or, D1 to D1, D0 to D0, sometimes it’s backwards, between vendors. Just an anomaly of RS-485.

As Ashlin says, if it doesn’t work, try swapping the leads on one end and see if that fixes it.
